4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (2024)

This step by step diy project is about 4×6 lean to shedshedplans. This is a small lean to shed that you can attach to an already existing building. The shed featured double doors to the front and decorative trims. Make sure you check the local codes and make adjustments to the plans, if required. Take a look over the rest of mywoodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

Projects made from these plans

4×6 Lean to Shed Plans

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (2)

Building-a-4×6-shed

Cut List

  • A– 3 pieces of 4×4 lumber – 72″ longSKIDS
  • B– 2pieces of 2×6 lumber– 72″ long, 6 pieces – 45″longFLOOR
  • B– 1piece of 3/4″ plywood – 48″x72″ longFLOORING
  • C – 2 pieces of 2×4 lumber – 72″ long, 1 piece – 65″ long, 8 pieces – 81″ longBACK WALL
  • C – 2 pieces of 2×4 lumber – 72″ long, 8 pieces – 19 1/2″ longTOP BACK WALL
  • E – 2pieces of 2×4 lumber – 12″ long, 1 piece – 72″ long, 1 piece – 65″ long, 6 pieces – 81″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 51″ longFRONT WALL
  • F – 2pieces of 2×4 lumber – 41″ long, 1 piece – 48″ long, 4 pieces – 81″ long 2xSIDEWALL

Shopping List

  • 3 pieces of 4×4 lumber – 6′
  • 4 pieces of 2×6 lumber – 6′
  • 3 pieces of 2×6 lumber – 8′
  • 1 piece of 3/4″ plywood – 4’x8′
  • 8 pieces of 2×4 lumber – 6′
  • 26 pieces of 2×4 lumber – 8′
  • 6d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler,wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

Oneweek

Related:

  • PART 1: 4×6 Lean to Shed Plans
  • PART 2: 4×6 Lean to Shed Roof Plans
  • PART 3: 4×6 Shed Door Plans

How to build a 4×6 attached shed

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (7)

Building-the-floor-frame

The first step of the project is to build the floor frame. Cut the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the rim joists and then insert 3 1/2″ screws into the perpendicular beams. Place the joists every 16″ on center, as in the diagram.

Fit 4×4 skids under the floor frame. Align the edges and use rafter ties to secure the skids to the frame of the floor.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (9)

Fitting the floor sheet

Fit a piece of 3/4″ plywood to the floor frame. Align the edges flush and insert 1 5/8″ screws, every 8″ along the framing.

Building the shed wall frames

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (10)

Building the front wall frame

Continue the project by assembling the front wall frame. Use 2×4 lumber for the front wall frame. Use 2×6 lumber for the double header. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush. Build a double header for the door from 2×4 lumber and 1/2″ plywood. You can adjust the size of the door opening to suit your needs.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (11)

Back-wall-frame

Build the frame for the back wall from 2×4 lumber. Cut the components from 2×4 lumber at the right dimensions. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and place the studs every 16″ on center.

Build the side walls for the shed using the same techniques described above and the information from the diagram.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (13)

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the walls with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Lock the adjacent walls together tightly using 3 1/2″ screws.

Assembling the shed framing

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (14)

Top back wall frame

Build the top back wall frame from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (15)

Fitting the top back wall

Fit the frame to the back wall and align the edges flush. Drill pilot holes and insert 3 1/2″ screws.

Finishing touches

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (16)

4×6 Lean to Shed

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (17)

4×6 Lean to Shed – overall dimensions

Make sure you check out PART 2 of the project so you learn how to build the roof and the double doors. This small shed can be attached to an already existing building. Adjust the size of this shed to suit your needs.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (18)

4×6 Attached Lean to Shed

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. If you want to get this project as a PDF file with 1 Cut list and 1 Shopping list, check out the GET PDF PLANS button bellow.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (19)

This woodworking project was about 4×6 lean to shedplans free.If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR:

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (25)

Ovidiu

I've been a designer and a woodworker since I first developed consciousness.

4x6 Lean to Shed Plans | PDF download | MyOutdoorPlans (2024)

References

Top Articles
Latest Posts
Article information

Author: Geoffrey Lueilwitz

Last Updated:

Views: 6394

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Geoffrey Lueilwitz

Birthday: 1997-03-23

Address: 74183 Thomas Course, Port Micheal, OK 55446-1529

Phone: +13408645881558

Job: Global Representative

Hobby: Sailing, Vehicle restoration, Rowing, Ghost hunting, Scrapbooking, Rugby, Board sports

Introduction: My name is Geoffrey Lueilwitz, I am a zealous, encouraging, sparkling, enchanting, graceful, faithful, nice person who loves writing and wants to share my knowledge and understanding with you.